Operation Manual

SAGEM F@st
TM
900 / 940 User Guide
8
3. Link your modem to your telephone line
The line lead supplied in your pack
should connect the modem to the
connector provided on your filter or to
a telephone network adapter.
When the modem is linked to the
telephone line, ADSL synchronization
follows automatically. The ADSL LED is
on permanently.
4. Connect your modem to your computer
For this, use the Ethernet cable
supplied with your modem.
When the modem is connected to your
computer, the Ethernet detection LEDs on your
modem and your Ethernet card light up.
At this point, you have completed all the connections required to use your ADSL
modem. All you now have to do is install the applications supplied with the modem
and configure your Internet access.