Operation Manual

SAGEM F@st
TM
900 / 940 User Guide
29
6.3 Modem not detected
Firstly check that the conditions in the previous section are satisfied.
LEDs Flag Status Corrective action
ADSL off
PWR on
Red
Modem powered.
Modem not
detected by your
computer.
Check that the Ethernet cable supplied in
your pack is correctly connected to your
modem, and to an active Ethernet port on
your computer. At both ends, you have
Ethernet detection LEDs. The Ethernet cable
to be used is a crossed UTP RJ45 cable.
6.4 Absence of ADSL synchronization
Firstly check that the conditions in the previous section are satisfied.
LEDs Flag Status Corrective action
ADSL off
PWR on
Yellow
Modem detected
by your
computer.
ADSL not
synchronized
Check the connection of your ADSL filters.
Each of your installation's telephone sockets
should be fitted with an ADSL filter.
Check that the RJ11 type line lead supplied
with your modem is connected to one of your
sockets. It is best not to use any telephone
line extension.
Lastly, check with your IAP that the ADSL
service is available on your telephone line.