Operation Manual

SAGEM F@st
TM
900 / 940 User Guide
28
6 Troubleshooting
6.1 Interpreting LED indications
6.1.1 LEDs visible on the modem cover
Marking ADSL PWR
Assignment
ADSL link Power supply
On steady
ADSL synchronized Modem powered up
Off
No ADSL synchronization Modem not powered
Blinking
Setting up ADSL synchronization Not applicable
6.1.2 "ETH" connector LEDs on the rear panel of the modem
LED Status Meaning
Left On Indicates that the connection is OK and that the link is set
up between the computer and the SAGEM F@st™ 900 /
940 modem
Off Incorrect connection
Right Blinking Traffic in progress (sending or receiving)
6.2 No modem power supply
LEDs Flag Status Corrective action
ADSL off
PWR off
Red
Modem not
powered
Check that the modem is receiving power
supply. Only the power supply unit supplied
with the modem should be used.
Check that your PSU's electrical
specifications are compatible with your mains
electricity network.
Lastly, uninstall then reinstall the BridgeMon
application.