Operation Manual

SAGEM F@st
TM
900 / 940 User Guide
25
4.2.2 DHCP connection to Mac
In MacOS X, for example, proceed as follows:
1
Click the
(apple) menu in the
menu bar, select "System
Preferences", then click the "Network"
icon and the screen opposite appears.
The Location: field should contain
Automatic.
The Show: field should contain Built-in
Ethernet.
2 Select the TCP/IP tab and the relevant panel appears.
3 The Configure: field should contain Using DHCP by default. If not, select this setting from
the drop down list.
Note: If the Using PPP setting appears, select the PPPoE tab, then uncheck the Connect
using PPPoE box.
4 Click Apply Now to enable connection in DHCP mode.
Note: The DHCP Client, DNS Servers and Search Domains fields are optional.