Operation Manual

SAGEM F@st

900 / 940 User Guide

4.2 DHCP connection mode

To connect your computer (PC or Mac) operating in DHCP client mode via its Ethernet

interface to the SAGEM F@st

900 / 940, you must correctly configure the computer. This

can be done irrespective of your computer's operating system.

Configuration entails assigning a public IP address to your computer (PC or Mac) by DHCP

request.

4.2.1 DHCP connection to PC

In Windows



 XP, for example, proceed as follows:

• Select

Start / Connections / Show

all connections, and the

screen opposite appears.

• Select the local connection

you want to use with the

SAGEM F@st

900 / 940,

then right click and select

Properties.

The screen opposite appears.

• Select the General tab and

then the TCP/IP protocol, and

click the Properties button.