Operation Manual

SAGEM F@st
TM
900 / 940 User Guide
21
4.1.3 Configuring the PPPoE client in MacOS

 X
1
Click the
(apple) menu in the
menu bar, select System Preferences,
then click the Network icon.
The following screen appears.
The Location: field should contain
Automatic.
The Show: field should contain Built-in
Ethernet.
2 Select the PPPoE tag and the relevant panel appears.
3 Check the Connect using PPPoE box to force connection in PPPoE mode and enable you
to complete the grayed out fields.
4 Complete the Account Name field with your user name.
5 Complete the Password field with your password.
Note: This "Account Name" and "Password" information will be provided to your by your
Internet Access Provider (IAP).
6 It is advisable to check the Show PPPoE status in menu bar box.
7 Click Apply now to register your input.