Operation Manual

SAGEM F@st
TM
900 / 940 User Guide
15
3.5.2 Active buttons
Button Meaning
Apply
Registers the changes to the "Bridge Lock" mode
Restart
Restarts the modem
SW Upgrade
Updates the modem's onboard software from the BridgeMon application (see
section below)
About
Gives the software version of the diagnostics application
Close
Closes the BridgeMon diagnostics screen, but keeps the BridgeMon
application running
3.5.3 Updating the modem software from the BridgeMon application
The SAGEM F@st™ 900 / 940 contains a non-volatile memory for saving its onboard
software. This software can be updated from the BridgeMon application.
Click the SW Upgrade button in the
"BridgeMon" screen and the screen
opposite appears.
Click Yes to continue (No to abort).
The screen opposite appears.
Click the Browse button to select the .img
file including the new software then click the
Upgrade button to update the onboard
software in non-volatile memory (save the
.img file, the default name and location are
displayed in the Location: field).
Note: Click Restore to restore the modem software as it was at time of factory delivery.
Click Cancel to abandon any changes made and return to the BridgeMon screen.