Operation Manual
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
1 - Introduction
SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A
Page 1-4 Sagem Communications document. Reproduction and disclosure prohibited
1.2 Composition of router pack
The router is supplied in a pack the composition of which changes according to the equipment
(SAGEM F@st
TM
2604 and SAGEM F@st
TM
2644):
As an example, please find below the "pack" chosen for the SAGEM F@st
TM
2604 router, i.e.:
¾ 1 SAGEM F@st
TM
2604,
¾ 1 mains adapter unit,
¾ 1 Gray ADSL RJ11/RJ11 FDT line cord (length = 3 m),
¾ 1 Yellow Ethernet RJ45/RJ45 linking cord (length = 1.75 m),
¾ 1 Quick Installation Guide,
¾ 1 Installation CD-ROM,
¾ 1 USB Wi-Fi key (optional),
¾ 1 USB Type A male/Type A female cable (length = 1.5 m) (optional),
¾ microfilter(s) (optional),
¾ 1 filter/splitter (optional).