Operation Manual

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-51

Sagem Communications SAS document. Reproduction and disclosure prohibited

Add

• Click on the Add button; the following screen appears:

To configure Trigger Port and Open Port, proceed as follows:

• Select the required WAN interface in the Use Interface list.

• Check the Select an application box, then select the service of your choice from the scroll

down list, for example "Aim Talk".

The Trigger Port Start, Trigger Port End, Open Port Start, Open Port End and

Protocol fields (transport protocol associated with this service) are automatically filled in

the table.

Note

You may complete the table by adding other ports associated with a protocol.

• Check the Custom application box to specify your own application, then.

• Enter the name of your own application.

• Fill in the Trigger Port Start, Trigger Port End, Open Port Start, Open Port End and

Protocol fields.