Operation Manual

5 - Information / Configuration
Page 5-50 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.7.5.2 Port Triggering
Object: The purpose of this menu is to open dynamically the firewall ports (open ports) via
"Trigger Ports" when an application (such as games or video) opens a connection via
the transport layer (TCP or UDP).
• In the Advanced Setup menu, select NAT then select Port Triggering.
The following screen opens:
Field Meaning
Application Name
Application name.
Trigger
• Protocol: Transport protocol (TCP, UDP or TCP/UDP).
• Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and
end port.
Open
• Protocol: Transport protocol (TCP, UDP or TCP/UDP).
• Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and
end port.
WAN Interface
WAN Interface used.