Operation Manual

5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-47
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.7.5 NAT
Object: NAT is a configurable IP address translation function which will be applied to the
interfaces of your router which you will have activated for this function.
Several translation function configurations, the NAT actions, can be configured and
may be activated as indicated in section 5.7.5.1 > Add.
This section contains the following four menus:
• Virtual Servers (see subsection 5.7.5.1)
• Port Triggering (see subsection 5.7.5.2)
• DMZ Host (see subsection 5.7.5.3)
5.7.5.1 Virtual Servers
Object: This menu is used to route directly to the External Ports the incoming data from a
Service server (such as, for example, FTP Server, SNMP, TFTP etc.) of the remote
network (WAN) to computers on the local network (LAN) via the Internal Ports.
• In the Advanced Setup menu, select NAT then select Virtual Servers.
The following screen opens: