Operation Manual

5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-43
Sagem Communications SAS document. Reproduction and disclosure prohibited
Field Action Default
value
Obtain DNS info from a
WAN interface
Check the box to obtain DNS server addresses
automatically, and select the desired interface in
the list WAN Interface selected.
Checked
Use the following Static
DNS IP address
If you check this box, you must enter DNS
server addresses.
Not
checked
Primary DNS server
Enter a primary DNS server address.
-
Secondary DNS server
Enter a secondary DNS server address.
-
• Click on the Next button to continue configuring the remote network (WAN) in IPoA mode.
Field Action
PORT / VPI / VCI
Displays the Port/VPI/VCI specific to the “IPoA” connection.
Connection Type
Displays the “IPoA” protocol.
Service Name
Displays the name of the service: ipoa_0_0_35.
Service Category
Displays the type of service adapted to the traffic required.
IP Address
Indicates the IP address entered.
Service State
Displays the status of the service: Enabled.
NAT
Displays the status of the NAT: Enabled.
Firewall
Displays the status of the firewall: Enabled.
IGMP Multicast
Displays the status of the IGMP function: Disabled.
Quality of Service
Displays the status of the Quality of Service function: Disabled.
• Click on the Apply/Save button to confirm the new WAN service.