Operation Manual

5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-33
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.7.2.4 Ethernet over ATM – Bridging
• Select the WAN service type Bridging.
Field Action Default
value
Enter Service description
Displays the name of the service being
configured. This name, which is allocated
automatically, is made up as follows:
Protocol_VPI_ Index _ VCI
For example: br_0_0_35.
Note: You may enter another service name.
br_0_0_35
Enter 802.1P Priority
11
Enter a value for the 802.1P Priority. This value
is between 0 and 7.
-1
Enter 802.1Q VLAN ID
11
Enter a value for the 802.1QVLAN ID. This
value is between 0 and 4094.
-1
Enable IPv6 for this
service
Check this box to enable IPv6 for this service.
Not checked
• Click on the Next button to continue configuring the remote network (WAN) in Bridge mode.
11
These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX Mode.