Operation Manual

5 - Information / Configuration
Page 5-22 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.7.2.1 Add
Note
You must have configured a DSL ATM interface (see section 5.7.1) to add a
WAN service.
• Click on the Add button.
• Select the DSL ATM interface for the WAN service.
• Click on the Next button to continue configuring the WAN service.
Note
Depending on the type of network protocol configured for the selected DSL
ATM interface (EoA, PPPoA or IPoA), the content of the following WAN
interface configuration screens differs.
Therefore, and for more clarity, each type of protocol will be dealt with
separately (screens + associated summary tables) below.