Operation Manual

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-19

Sagem Communications SAS document. Reproduction and disclosure prohibited

5.7.1.1 Add

• Click on the Add button to display the following screen:

ATM PVC Configuration

Field Action Default

value

VPI

Enter a VPI value

between 0 and 255.

VCI

Enter a VPI value

between 32 and 65535.

Select DSL Link Type

Select the type of network protocol from the

scroll down list:

EoA : Ethernet over ATM

PPPoA : PPP over ATM

IPoA : IP over ATM

Note: EoA is for PPPoE, IPoE and Bridge.

EoA

Encapsulation mode

Select the encapsulation mode for the selected

DSL link type.

To provide more clarity, a summary table is

presented below for each type of protocol.

LLC/SNAP

BRIDGING

Service Category

Select the type of service adapter to the traffic

from the scroll down list:

UBR without PCR : Unspecified Bit Rate

UBR with PCR : Unspecified Bit Rate

CBR : Constant Bit Rate

Non Realtime VBR : Variable Bit Rate

Realtime VBR : Variable Bit Rate

UBR

without

PCR

This value is delivered to you by your Internet Service Provider (ISP).