Operation Manual

5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 5-17
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.7 Advanced Setup
Object: This menu is used to configure the specific parameters for your router.
Important
This menu must only be used by experienced users
This section contains the following nine menus:
• Layer2 Interface (see subsection 5.7.1)
• WAN Service (see subsection 5.7.2)
• LAN (see subsection 5.7.3)
• IPv6 LAN Config (see subsection 5.7.4)
• NAT (see subsection 5.7.5)
• Security (see subsection 5.7.6)
• Parental Control (see subsection 5.7.7)
• Quality of Service (see subsection 5.7.8)(see note)
• Routing (see subsection 5.7.9)
• DNS (see subsection 5.7.10)
• DSL (see subsection 5.7.11)
• Upnp (see subsection 5.7.12)
• DNS Proxy (see subsection 5.7.13)
• Interface Grouping (see subsection 5.7.14)
• LAN ports (see subsection 5.7.15)
• Certificate (see subsection 5.7.16)
Note
The menu Quality of Service only appears if you checked the
"Enable Quality Of Service" box in the WAN interface configuration screen (see
Advanced Setup>WAN Service – subsection 5.7.2>Add).