Operation Manual

5 - Information / Configuration
Page 5-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.1 Accessing the welcome screen
Note
To access this screen, you must have configured one of your computer's
interfaces using the installation CD-ROM provided with your router (see
section 3).
If you are using your computer's Ethernet card to configure your router, connect it to an Ethernet
port (LAN1 to LAN4).
Your router is then configured using a simple Web browser (e.g. Internet Explorer).
Note
The router's DHCP server function is activated by default with an address range
defined as indicated in subsection.5.7.3.
To access the configurer, proceed as follows:
1. Click on Start > All Programs > SAGEM F@st 1704 >
.
2. In the login screen that appears, enter your identification information.
By default, the identification information is:
Username:
admin
Password:
admin
Note
The equipment's IP address (192.168.1.1) appears in the header bar.
3. Click on OK to validate.