Operation Manual

Annex G - Connectors
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page G-3
Sagem Communications SAS document. Reproduction and disclosure prohibited
G.3 Pinouts of the LAN1, LAN2, LAN3 and LAN4 connectors
The Ethernet interface is connected to the equipment using a RJ45 fixed connector (8 pins).
12345678
Contact No Signal Meaning
1 TXD+
(+) Emission to terminal
2 TXD- (-) Emission to terminal
3 RXD+ (+) Reception of terminal
4 NC Not connected
5 NC Not connected
6 RXD- (-) Reception of terminal
7 NC Not connected
8 NC Not connected
Note
The Ethernet port is self-detecting. You can use either straight or crossed
cables. An emission or reception signal is detected automatically.