Operation Manual

Annexe E - Configuration par défaut
Page E-2 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
This section details the values of the default parameters of your SAGEM F@st
TM
1704 when it
leaves the factory.
These default parameters can be modified by a particular preconfiguration of your SAGEM
F@st
TM
1704.
E.1 Default username and password
Username:
admin
Password:
admin
Note
The Username and Password can be different according to the ISP (Internet
Service Provider).
E.2 Default configuration for the local network(LAN)
The following table details the values of the principal LAN parameters of your router (LAN1 to
LAN4):
LAN characteristics Value State
LAN1 IP address ( )
192.168.1.1/24 Internet and HTTP configuration tool access (bridged)
LAN2 IP address ( )
LAN3 IP address ( )
LAN4 IP address ( )
BROADCAST, ARP, MULTICAST _ Activated
Router _ The LAN traffic is routed to your ISP
NAT/PAT _ Activated