Operation Manual

2 - Description and connection of your router
SAGEM F@st™ 1704 Reference Manual - 253272861-A Page 2-3
Sagem Communications SAS document. Reproduction and disclosure prohibited
2.1.1 Connectors
Marking Meaning
LINE
RJ11 connector - 6 pts. This connector is identified by the colour grey.
It is used for the connection to an ADSL line (WAN interface).
LAN x
(1 to 4)
RJ45 connectors - 8 pts (10/100BASE-T Ethernet Interface). These connectors are
identified by the colour yellow.
They are used to connect to a computer or a television set (via a TV/Video Decoder).
Power
Miniature jack fixed connector.
This connector enables the router to be supplied with direct current from a mains
adapter unit.
Reset
This button allows the router to be reset to the factory configuration (see § A.7).
Note: To prevent an accidental loss of configuration, the router is reset relative to the
other elements.
WLAN/WPS
This button allows the router to switch to easy-pairing mode.