Operation Manual

5 - Information / Configuration
Page 5-112 SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS document. Reproduction and disclosure prohibited
5.9 Diagnostics
Object: This menu is used to display all the tests performed on the connections made from
your router to your Internet Service Provider (ISP). These tests concern:
• connection to your local network (LAN),
• connection to your "DSL Service Provider",
• connection to your "Internet Service Provider".
Note
A hypertext link (help) enables the user to access context-related help. This
help gives an explanation concerning the state of the connection (PASS in
green, DOWN in orange and FAIL in red) and supplies the appropriate
troubleshooting procedures.
The ADSL line translates the three statuses detailed in the table below.
State Meaning
PASS
Indicates that the test was completed successfully.
DOWN
Indicates that an interface (ETH, Wi-Fi) has not been detected.
FAIL
Indicates that the test has failed, or that it is impossible to start a command.
If a test fails, proceed as follows:
1. Click on the corresponding Help link to access detailed information and problem-solving
procedures.
2. Click on Test to check the problem is solved and resume the connection tests.
To access the Diagnostic tool:
• Select the Diagnostics menu.