Installation guide

5 - Information / Configuration
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Sagem Communication document. Reproduction and disclosure prohibited Page 5-37
Field Action
VPI/VCI
Displays the VPI/VCI specific to the "Bridge" connection
Connection Type
Displays the "Bridge" protocol
Service Name
Displays the name of the service: br_0_35_1
Service Category
Displays the type of service adapted to the traffic required
IP Address
In the "Bridge" connection, this field is: Not Applicable
Service State
Displays the status of the service: Enabled
NAT
Displays the status of the NAT: Disabled
Firewall
Displays the status of the firewall: Disabled
IGMP Multicast
In the "Bridge" connection, this field is: Not Applicable
• click on the button to save the WAN interface configuration.