Installation guide

3 - Installing and configuring the router
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page 3-2 Sagem Communication document. Reproduction and disclosure prohibited
Your router can be installed and configured with the following interfaces:
¾ Ethernet (ETH)(cf. § 3.1),
¾ USB (cf. § 3.2).
Before installing your router, we recommend you uninstall every ADSL router.
The installation procedure described below was undertaken in
Windows® XP. Installation in other Windows operating
systems® (98, ME and 2000) can be slightly different.
1
Insert the CD-ROM in the appropriate
driver of your computer; the screen
opposite is displayed.
Click button
to start the
installation.
Observation: If this screen does not appear: Select, in the menu Start, the command
Execute, then enter:
<letter of CD-ROM drive> :\autorun.exe (for example, e:\autorun.exe)
then click OK.