User guide

27 Installing servers on the local network

SAGEM F@st™ 1400 / 1400W

• Click on LAN Servers in the

Basic menu.

The screen opposite will be

displayed.

Configuring the modem/router in order to be able to use

servers on the local network

INSTALLING SERVERS ON THE LOCAL

NETWORK

Installing servers on the local network or using certain Peer-to-Peer software programs

requires an additional configuration of your modem/router.

This configuration must be carried out once for each server or computer which uses a

Peer-to-Peer software program. To do that, the connection with your Internet Service

Provider must be set up (meaning that you are able to surf).

• Click on Add.

The screen opposite will be

displayed:

• Indicate the name of your

server in the Server Name field

(e.g. MyServerHTTP).

• Set Access Activated to Yes.

• Indicate the protocol and port

being used by your server.

Refer to the table below for

further information.

• Indicate your server’s local IP address.

• Click on Apply.

• Save by clicking on Save button.

You can now access your server from the Internet.