User guide

Configuring the modem/router 16
SAGEM F@st™ 1400 / 1400W
4.3 Installing the USB drivers in MacOS 8.6 and 9
The modem/router can be installed on MacOS 8.6, MacOS 9.0, MacOS 9.1
and MacOS 9.2. The example below was carried out in MacOS 9.0.
• Insert the modem/router’s CD-ROM in the appropriate drive of your computer. An icon
will appear on the desktop.
• Double-click on this icon to display the composition of the CD-ROM on the screen.
• Double-click on the OS 8.6 - 9.x (USB) icon to activate the install program.
• The install screen opposite will appear.
Click on Install to continue the installation
procedure.
• Once the files have been copied onto the
hard disk, the screen opposite will appear.
Connect the USB cable to the modem/
router on the rear panel of the port where
marked USB (see § 4.4)
Then click on Continue.
• When the installation procedure is
complete, the screen prompting you to
reboot your computer will appear.
Click on Restart.
• Select Apple / Control Panel / TCP/IP in
the menu bar. The screen opposite will
appear.