User guide

Appendix F - Connectors
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Sagem Communication document. Reproduction and disclosure prohibited Page F-3
F.3 "ETH" connector pinout
The ETH interface is connected to the equipment via an RJ45 socket (eight contacts).
12345678
Contact N° Signal Meaning
1TXD+
(+) Transmit to terminal
2 TXD- (-) Transmit to terminal
3 RXD+ (+) Receive from terminal
4 NC Not Connected
5 NC Not Connected
6 RXD- (-) Receive from terminal
7 NC Not Connected
8 NC Not Connected
The Ethernet connector system is self-detecting. You can use straight or cross-pinned
cables interchangeably. A transmit or receive signal is detected automatically.
F.4 "LINE" connector pinout
The equipment is connected to the ADSL line via an RJ11 socket (six contacts).
123456
Contact N° Signal Meaning
3 LINE-A Line A signal
4 LINE-B Line B signal
1 NC Not Connected
2 NC Not Connected
5 NC Not Connected
6 NC Not Connected