User guide

Appendix D - Default configuration
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page D-2 Sagem Communication document. Reproduction and disclosure prohibited
This chapter gives the default parameter settings for the SAGEM F@st™ 1200/1240
on leaving the factory.
D.1 Default configuration on the local area network (LAN) side
The table below gives the values of the main default LAN parameters for your residential
gateway (ETH, USB):
LAN characteristics Value Status
ETH IP address
192.168.1.1/24 Internet and configurator access.
USB IP address
BROADCAST, ARP, MULTICAST Activated
Router LAN traffic is routed to your ISP
NAT/PAT Activated