User guide

3 - Installing your modem/router
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Sagem Communication document. Reproduction and disclosure prohibited Page 3-9
2
The Show: field should be set to Built-
in Internet (by default)
The TCP/IP tab appears automatically.
The Configure Ipv4: field should
contain Using DHCP by default. If not,
select this setting from the drop-down
list.
Note: If the Using PPP setting is
displayed, select the PPPoE tab then
uncheck the Connect using PPPoE
box.
Click Apply Now to confirm connection
in DHCP mode.
3
The network window is updated as
shown opposite.
This panel should show the IP address,
the subnet mask supplied by the
modem/router and the default IP
address of the SAGEM F@st
TM
1200/1240's LAN interface
(192.168.1.1).
You can now close the network window.
The DHCP client, DNS servers and Search domains fields are optional.