User guide

2 - Description
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Page 2-6 Sagem Communication document. Reproduction and disclosure prohibited
2.2.1 Powering up
¾ First connect the end of the mains adapter lead (adapter supplied with the equipment) to the
PWR socket on your SAGEM F@st™ 1200/1240,
¾ Connect the adapter to a nearby mains outlet,
¾ Set the "I/0" switch to the "I" position,
¾ The PWR LED lights first followed by the other three LEDs, then the other three LEDs switch
off in turn.
2.2.2 Connecting the ADSL lead to the SAGEM F@st™ 1200/1240
¾ Connect the other end of the lead to the port marked ADSL on the splitter connected to your
home's standard French wall telephone outlet (T connector).
2.2.3 Connecting the SAGEM F@st™ 1200/1240 with the phone
wall socket via Filter/Spitter
¾ Connect one end of the RJ11/RJ11 lead supplied to the LINE socket on your
SAGEM F@st™ 1200/1240.
¾ Connect the other end of this lead to the port marked ADSL on the filter/splitter.
¾ Connect the LINE filter/splitter port to the phone wall socket.
¾ Connect the PHONE filter/splitter port to your telephone.
2.2.4 Connecting the SAGEM F@st™ 1200/1240 to a computer
via the ETH lead
This connection is set up on installation with the dedicated CD-ROM.
2.2.5 Connecting the SAGEM F@st™ 1200/1240 to a computer
via the USB lead
This connection is set up on installation with the dedicated CD-ROM.