User guide

2 - Description
SAGEM F@st™ 1200/1240 User Guide - 252569421-01
Sagem Communication document. Reproduction and disclosure prohibited Page 2-3
2.1.1 LEDs
The various LEDs in the figure above are described in the table below:
LED Meaning
PWR Power supply presence
This LED is lit when power supply is present.
USB Activation / Activity on the USB link
This LED is lit when the USB interface is active.
This LED is off when no traffic is detected.
ETH Ethernet link
This LED is lit when the ETH interface is active.
This LED blinks in pace in with the traffic.
This LED is off if no traffic is detected.
LINE ADSL line activation
This LED blinks slowly when the ADSL line is being synchronized,
This LED is lit when the ADSL line is synchronized.