User guide

22
Clock Setting
The base manages the time displayed on the handset, so the time indicated on your handset
should be re-verified after any loss of electric power. If the time is not set correctly, proceed as
indicated above to set the time.
-Press Menu.
- Press Navigation (up/down/left/right) button to select Alarm/Clock.
-Press OK to select Clock Setting.
A screen displays the current date and time.
-Press OK to set the time/day (hh:mm DD-MM-YY).
-Press OK to confirm and save.
Alarm Setting
The alarm function enables you to activate the handset ringer every day at a set time.
When the alarm is triggered the selected ring tone sounds for 60 seconds through the handset
speaker and an alert screen is displayed. To turn off the alarm press any key.
-Press Menu.
- Press Navigation (up/down/left/right) button to select Alarm/Clock.
-Press OK.
- Press Up or Down button to select Alarm Setting.
-Press OK.
An information screen shows the alarm clock status.
- the time at which the handset will ring,
- if the alarm is on or off.
-Press Edit to edit time.
-Press OK to confirm and saved.
- Press Up or down button to select Alarm Tone.
-Press OK to select alarm tone (1,2,3).
-Press OK to confirm and saved.
- Press Up or down button to select Alarm: on/off.
-Press On or Off button to select on or off.
-Press ESC to go back standby mode.
ALARM/CLOCK
LU 252976139A D86C EN.book Page 22 Vendredi, 3. août 2007 9:56 09