Operation Manual

84
Select Adv. Settings using  or . Press Confirm .
Select HS Settings using  or . Press Confirm .
Select Registration. Press Confirm .
The handset enters the registration mode.
On the base:
Put the base to which you want to register the handset in registration
mode: press on the button on the base for a few seconds.
The green light blinks rapidly, the base is in registration mode.
The new handset and the base are mutually searching for each other. The
registration may take several seconds.
Once the handset is registered, the handset automatically exits the
registration mode and lets you know the registration is done.
Modifying the base preference
This function enables you to specify which base will be used by your
handset to make calls (if your handset is registered to several bases).
On the navigator key , press  or  until the Settings screen is
displayed, press OK to confirm.
Select Adv. Settings. Press Confirm .
Select HS Settings using  or . Press Confirm .
You can also set your base to the registration mode using a
handset already registered by selecting the Registration function
in the menu Settings/Adv. Settings/Base setting
SETTINGS
LU D85C UK.book Page 84 Jeudi, 16. décembre 2004 5:30 17