Operation Manual

83
Select Language using  or . Press Confirm .
An information screen presents the current language used.
• To keep the setting, press Confirm .
• To change the setting, press Edit .
Choose the desired language from the language list. Press  or  to
select the language. Press Confirm .
The screen shows the new language used. Press Confirm .
To exit the menu, press the red key .
ADVANCED SETTINGS / HANDSET SETTINGS
Registering a new handset to a base
To register a new handset to a base you must:
• put the handset in registration mode,
• put the base in registration mode.
Once this is done, the registration (mutual recognition of the base and the
new handset) will be done automatically (registration can take a few
seconds).
Take the handset to be registered:
On the navigator key , press  or  until the Settings screen is
displayed, press OK to confirm.
If the code of the base has been modified (different from 0000),
the registration will not be possible with this procedure. Refer to
paragraph Personal registering, page 86
SETTINGS
LU D85C UK.book Page 83 Jeudi, 16. décembre 2004 5:30 17