Operation Manual

78
Once the key is programmed, a screen invites you to programme the
key .
• To keep the function, press Confirm .
• To modify the function, press Edit .
Once the key is programmed, you return to the Settings menu.
To exit the menu, press the red key .
Modifying the date and time
On the navigator key , press  or  until the Settings screen is
displayed, press OK to confirm.
Select Date/time using  or . Press Confirm .
A screen displays the current date and time.
• To keep the date and time settings, press Confirm .
• To modify the date and/or time settings, press Edit .
You can enter the date in DD/MM/YY format. Once the date is modified,
press Confirm .
You can go from programming the key to programming the
key by pressing
 or  on the navigator key.
The base manages the time displayed on the handset, so the time
indicated on your handset should be re-verified after any loss of
electric power. If the time is not set correctly, proceed as indicated
above to set the time.
SETTINGS
LU D85C UK.book Page 78 Jeudi, 16. décembre 2004 5:30 17