Operation Manual

71
• You can pick a number from the phonebook. Press , make your
selection using  or  and Confirm . The number is displayed.
Press Confirm .
To exit the menu, press the red key .
The emergency number is automatically activated. The name of the
handset displayed on the idle screen becomes SOS.
Modifying the base code
The base code (0000 being the default setting) is required to access
certain security functions. It must be composed of 4 digits.
On the navigator key , press  or  until the Security screen is
displayed, press OK to confirm.
Select Change Code using  or . Press Confirm .
Enter the old base code using the keypad. Press Confirm .
Enter the new base code using the keypad. Press Confirm .
Enter the new code again. Press Confirm .
To exit the menu, press the red key .
Carefully note down the base code number. You will need this
code to change certain settings.
SECURITY
LU D85C UK.book Page 71 Jeudi, 16. décembre 2004 5:30 17