Operation Manual

57
- Ring tone: to set the ring tone that will sound when the alarm
goes off.
- New entry: to set up a new alarm.
To exit the menu, press the red key .
Monitoring a room
You can use your handset to monitor a room. This allows you, for example,
to monitor a baby's room.
To do so, place one of the handsets in the room to be monitored. This unit
will be in "sender" mode.
The other handset will remain with you, it is in "receiver" mode.
On the receiver handset:
On the navigator key , press  or  until the Accessories screen is
displayed, press OK to confirm.
Select Room monitor using  or . Press Confirm .
Select the sender handset using  or . Press Call .
The sender handset rings, pick up using the green key .
On the sender handset:
A screen invites you to activate the monitor mode (sender mode). Press
Yes .
Both handsets are now in monitor mode.
• Place the sender handset in the room to be monitored.
The handset in sender mode does not ring to notify you of
incoming calls. It can therefore be placed in a room where
someone is sleeping.
ACCESSORIES
LU D85C UK.book Page 57 Jeudi, 16. décembre 2004 5:30 17