LU D85C UK.book Page 1 Jeudi, 16.
Préliminaire.fm Page i Mardi, 21. décembre 2004 2:15 14 INTRODUCTION Dear customer: Thank you for purchasing a SAGEM DECT telephone; we appreciate your trust in us. This product was manufactured with the upmost care, should you encounter any difficulties during its use, we recommend that you refer to this user guide. You can also find information on the following site: http://www.sagem.
LU D85C UK.book Page I Jeudi, 16.
LU D85C UK.book Page II Jeudi, 16.
LU D85C UK.book Page 1 Jeudi, 16. décembre 2004 5:30 17 YOUR TELEPHONE Unpacking Place the box in front of you, open it and make sure it contains the following items: • • • • • • • one base, one handset, one battery compartment cover, one equipped power adapter, one telephone line cord, three rechargeable batteries, this user guide.
LU D85C UK.book Page 2 Jeudi, 16. décembre 2004 5:30 17 YOUR TELEPHONE Your handset With its user-friendly design, you will appreciate how easy it is to hold and its quality during conversations.
LU D85C UK.book Page 3 Jeudi, 16. décembre 2004 5:30 17 YOUR TELEPHONE The navigator key, a rapid selection tool.
LU D85C UK.book Page 4 Jeudi, 16. décembre 2004 5:30 17 YOUR TELEPHONE Other icons Accessories Birthday Fax Alarm clock Call log Home Mobile Number 1 Number 2 Number 3 Work Personalisation Settings Phonebook Security SMS Backlighting low Missing calls When the battery charge icon is at minimum, your screen will not be lit and the volume level of the hands-free function will be decreased until the battery is recharged.
LU D85C UK.book Page 5 Jeudi, 16. décembre 2004 5:30 17 YOUR TELEPHONE Connecting the base Before making any connections, please refer to the safety instructions presented at the beginning of this user guide. Place the base where it should be located. Plug the telephone line connector (as shown in the illustration) into the telephone socket on the underside of the base and connect the other end to the telephone wall socket.
LU D85C UK.book Page 6 Jeudi, 16. décembre 2004 5:30 17 YOUR TELEPHONE Turning the handset on and off To turn the handset off, hold down the red key and the message "Thank You Goodbye" is displayed briefly on the screen. Your handset is now off. To turn your handset back on, hold down the green key . Information is displayed on the screen, including the name and number of the handset (for instance HANDSET -2 -), the date and the time.
LU D85C UK.book Page 7 Jeudi, 16. décembre 2004 5:30 17 YOUR TELEPHONE Installing a SIM card Take your base, remove the SIM card compartment (nr 2) from your base unit. It is located on the right-hand side. 2 1 Take your SIM card (nr 3) and slide it into the compartment making sure it's the right way up (printed circuit visible and notch to the right).
LU D85C UK.book Page 8 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED GETTING STARTED Installation guide Once the handset has been turned on, press OK and select your language. Set up assistance is automatically provided. It helps you set certain parameters for your telephone. The parameters are: • date and time, • name of the handset, • external ringer, Contact your service provider to find out which services are available (caller display service, SMS, etc.) and the charges involved.
LU D85C UK.book Page 9 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED During a call During a call, numerous options are accessible by pressing Menu . Select the desired option in the following list: - Handsfree: to activate the handset speaker. - Internal call: to transfer the call to another handset. - Make 2nd Call: to make a second call. - Secret mode: to mute the handset microphone. - Phonebook: to access the phonebook. - Calls: to access the call log.
LU D85C UK.book Page 10 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED The list of handsets registered to the base appears. Select the handset you want to call using or . Press Call . The handset called rings, once someone picks up transfer the call by pressing the red key . To retake the call before it is picked up by the handset called, press Option . Using the arrow, select Hanging up. Press Activate or .
LU D85C UK.book Page 11 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED The second call is then launched, with the first call still on hold. To alternate from one call to the other Press Menu . Select Switch using or . Press Activate . The call in progress is put on hold, and you can then take the second call. To end one of the calls and continue the other one Press Menu . Select Hanging up using or . Press Activate .
LU D85C UK.book Page 12 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED You can then talk to both parties simultaneously. To end the 3 way-call, press the red key . . Dual incoming call management can also be done via the R key - Accepting a second incoming call: + . - Making a second call during communication: - Alternating from one call to the other: + . - Ending a call and switching to the call on hold: -Setting up a 3 way-call: + + recipient number. + . .
LU D85C UK.book Page 13 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED Using or , select Secret mode and press Activate . The Microphone muted message will appear on the screen and the flashing icon will be displayed on the communication screen. To deactivate secret mode: Press Menu Using or , select Secret mode and press Deactivat . The Microphone activated message will appear on the screen and the flashing icon will disappear. Your correspondent will be able to hear you again.
LU D85C UK.book Page 14 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED To correct any mistakes made in entering the name, use: • the C key to clear a letter, • the , keys to move to a specific location in the name in order to add or delete a letter. Once the name is entered. Press Confirm . The number is displayed on the screen. Press Confirm .
LU D85C UK.book Page 15 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED Communication between two handsets To communicate between handsets, both handsets must be matched to a single base, and must be within range of the base. To call another handset, press the key. Select with the desired handset with the or keys. Press Call . The handset rings. Pick up on the second handset using the green key . To end the call, press the red key .
LU D85C UK.book Page 16 Jeudi, 16. décembre 2004 5:30 17 GETTING STARTED If no personal box has been created, only the shared box is displayed on the screen. To create a personal box, select PersoBox Menu and press Confirm . Follow the instructions displayed on the screen. For further details, refer to the paragraph Creating a personal box, page 42. Enter the text of your SMS using the keypad. Press several times on a key to scroll through the letters.
LU D85C UK.book Page 17 Jeudi, 16. décembre 2004 5:30 17 MENU STRUCTURE Phonebook View New entry Edit Delete Search Read SIM card Transm. Sms Edit SMS Read SMS Memory Empty SMS box Settings Calls Incoming calls Outgoing calls Events Accessories Alarm clock Organiser Birthday Timer Room monitor Games Personaliz. IrDA SMS Centres Sub.
LU D85C UK.book Page 18 Jeudi, 16. décembre 2004 5:30 17 MENU STRUCTURE Security Keypad lock Emergency Change Code Time limit Restriction Intrusion Settings Program keys Date/time Contrast Auto Hang up Auto Pick up Adv. Settings Help Voice Box No Country code Language HS Settings Base Settings Line Settings SMS Settings 18 Registration PreferredBase Reset HS Custom Handset name Registr.
LU D85C UK.book Page 19 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK YOUR PHONEBOOK You can store 200 phonebook entries in your phonebook. Each phonebook entry can contain the name of your contact which can be a maximum of 16 characters long (spaces included), your contact's telephone number up to 24 digits and an icon identifying the type of number (work, home, mobile...). You can associate a unique ring tone to each entry and thus create your own call groups.
LU D85C UK.book Page 20 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK The name input screen appears. Using the keypad keys, enter the name of your contact by pressing successively on the corresponding keys. To correct any mistakes made in entering the name, use: • the C key to clear a letter, • the , keys to move to a specific location in the name in order to add or delete a letter. Once you are done making your changes, press Confirm . The number input screen appears.
LU D85C UK.book Page 21 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Viewing the phonebook On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm (you can access the phonebook directly using the key). Select View. Press Confirm . Select the entry you want to view using it, press OK to confirm. or . Once you have selected You can call the number that is associated to the entry directly by pressing the green key .
LU D85C UK.book Page 22 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Editing an entry On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm (you can access the phonebook directly using the key). Select Edit using or . Press Confirm Select the entry with the keys name of the entry then with the , . or by entering the first letter of the or keys. Press Edit . You enter the name input screen. The cursor is at the end of the name.
LU D85C UK.book Page 23 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Deleting an entry On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm (you can access the phonebook directly using the key). Select Delete using or . Press Confirm Select the entry with the keys name of the entry then with the , . or by entering the first letter of the or keys. Press Delete . A confirmation screen asks you if you wish to delete the entry.
LU D85C UK.book Page 24 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Once the first letter of the name is displayed, wait a moment. The phonebook selects the first name in the list that starts with the selected letter. Press or to select the specific entry that you wish to view or call, press OK to confirm. Second method: On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm (you can access the phonebook directly using the key). Select Search using or .
LU D85C UK.book Page 25 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Select Read SIM card using or . Press Confirm . Enter the PIN code for your SIM card. Press Confirm . If you incorrectly enter a code three times, you SIM card will be blocked. A screen will show the third and final attempt. Choose to transfer: • the entire phonebook, • several numbers. using the or keys. Press Confirm .
LU D85C UK.book Page 26 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Transfer all or part of the phonebook Each of your handsets has a phonebook. However if you do not want to enter the same list of contacts several times, the transfer function in the phonebook menu allows you to easily transfer your phonebook from one handset to the next. Transfer by intercommunication On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm. Select Transm. using or .
LU D85C UK.book Page 27 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Depending on the type of transfer you selected, follow one of the procedures below: • To transfer the entire phonebook, wait a few seconds. Once the operation is done, a screen indicating the end of the transfer will appear. • To transfer a number, take the sending handset and do the following: - Select the number to be transferred using the or keys. - Press Transfer. • to send it to the receiving handset.
LU D85C UK.book Page 28 Jeudi, 16. décembre 2004 5:30 17 YOUR PHONEBOOK Select By IrDA with the keys or . Press Confirm Select the number to be transferred using the Press Transfer. or . keys. to send it to the receiving handset. Wait until the transfer is complete. You will then return to the numbers in the directory. Select another number using the or keys and press Transfer. . Repeat the operation until you have transferred all the numbers you want to transfer.
LU D85C UK.book Page 29 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE SMS SERVICE - TEXT MESSAGES You can use your DECT telephone to send, receive and track SMS messages (called text messages). You can send SMS messages either another fixed SMS-capable telephone or a mobile telephone. The SMS sending and receiving functions of your telephone are only functional if your service provider offers the corresponding service to its subscribers.
LU D85C UK.book Page 30 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE A text input screen appears. Using the keypad keys, enter the text message by pressing successively on the corresponding keys. The capital letters are accessible by long press on . Alphanumeric keypad key correspondence depending on the actived mode (capital letters or small letters). ’, 1, #, ,, .
LU D85C UK.book Page 31 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE Special characters During the writing process, certain special characters are accessible by doing the following. Press the button, using desired character, use or and the keypad numbers, select the to confirm. (Example: "<" = 3 times on and once on the keypad number "6").
LU D85C UK.book Page 32 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE The letters corresponding to the alphanumeric keypad key are displayed on the top left side of the screen (in the order respecting the successive presses on the key ). Sending an SMS Once you are done writing your text message, press Option to select the type of delivery. You can choose between the following options: - Send: to realise a straightforward transmission. - Store: to save your text as a draft.
LU D85C UK.book Page 33 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE • To save the message, press Yes . • If you do not want to save the message, press No . In the event of a delivery failure A message on your display informs you that your message could not be sent. Press Cont. . Different options come up on the screen: - Save: to save your text in draft form. Once it is saved, you will be able to resolve the potential problems and send your message at a later time without having to enter it again.
LU D85C UK.book Page 34 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE Select Read SMS using or . Press Confirm Select a send box, press Confirm . . If no personal box has been created, only the shared box is displayed on the screen. To create a personal box, select PersoBox Menu and press Confirm . Follow the instructions displayed on the screen. For further details, refer to the paragraph Creating a personal box, page 42. Enter the code of the box, if you have selected a personal box.
LU D85C UK.book Page 35 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE Managing read messages Once the message has been read, press Option and select: - Answer : to write an SMS in response to the message received (the receiver number of the new SMS will automatically be entered). - Store : to keep this message. It will be stored in the "Inbox" message folder. - Delete : to permanently delete this SMS. - Transfer : to forward this message to a new recipient. You will be able to modify the original message.
LU D85C UK.book Page 36 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE Use or to view all of the information. To exit the memory information screen, press Return . Emptying an SMS folder This function is used to delete all the messages contained in a folder. To delete the messages one by one refer to paragraph Managing read messages, page 35. When you empty an SMS folder, all messages linked to a personal box will not be erased.
LU D85C UK.book Page 37 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE Sending SMS text messages from mobile phones Your telephone can receive messages from ANY mobile phone (both national and international) provided the following instructions are followed. When replying to a telephone from a mobile phone Mobile users should select REPLY on their mobile phone and anywhere within the text of their message they must insert the fixed line telephone number with a # symbol before and after it.
LU D85C UK.book Page 38 Jeudi, 16. décembre 2004 5:30 17 SMS SERVICE Mobile users are advised to store the text server number (07786 201 010) in their mobile phone directory. New SMS text messages sent from mobile phones are sent to 07786 201 010 (SMS server) who forward the message onto the recipient.
LU D85C UK.book Page 39 Jeudi, 16. décembre 2004 5:30 17 SMS SETTINGS SMS SETTINGS You can access the SMS settings menu via the SMS menu or the Adv. Settings submenu in the Settings menu. Modifying the SMS centre number This function is for changing the numbers of the SMS centres. You can define up to four SMS centre numbers for reception and one for transmission. By default, the number of the SMS sending centre is programmed to centre SMS 2 and the number of the SMS reception centre to centre SMS 1.
LU D85C UK.book Page 40 Jeudi, 16. décembre 2004 5:30 17 SMS SETTINGS Then define which SMS centre will be used for transmission. Choose the SMS transmission centre Select SMS send centre using or keys. Press Confirm . • To change the SMS transmission centre, press Edit . or keys and press Select the SMS centre wanted using the • To keep the current SMS centre, press Confirm Confirm . To exit the menu, press the red key . .
LU D85C UK.book Page 41 Jeudi, 16. décembre 2004 5:30 17 SMS SETTINGS If your contact forgets to include the terminal number, the SMS message will be sent to terminal 0 by default. If you do not assign a different number to each SMS-type device connected on the same line, you will not be able to receive SMS. On the navigator key , press or until the SMS screen is displayed, press OK to confirm. Select Settings. Press Confirm . Select Sub-Address using . Press Confirm or .
LU D85C UK.book Page 42 Jeudi, 16. décembre 2004 5:30 17 SMS SETTINGS Sub-Addressing You have 10 sub-addresses (9 personal and 1 collective) assigned to your telephone line (telephone number).
LU D85C UK.book Page 43 Jeudi, 16. décembre 2004 5:30 17 SMS SETTINGS Select Private box. Press Confirm Select New using or . . Press Confirm Enter the box name. Press Confirm . . If you enter a name that already exists, a message tells you that the name already exists. The box name can have no more than 10 characters. Enter the code associated to the box. Press Confirm . The user code must contain 4 digits. Enter the code associated to the box again. Press Confirm .
LU D85C UK.book Page 44 Jeudi, 16. décembre 2004 5:30 17 SMS SETTINGS Viewing a message from a personal box On the navigator key , press or until the SMS screen is displayed, press OK to confirm. Select Read SMS. Press Confirm . Select the personal box. Press Confirm Enter the personal box code. Press Confirm Select the folder New or Inbox using Select the message using or or . . Press Confirm . Press Confirm . . The message is displayed on the screen.
LU D85C UK.book Page 45 Jeudi, 16. décembre 2004 5:30 17 SMS SETTINGS If an SMS is sent to a personal box not listed on your telephone (or if this box was removed), the SMS will not be delivered. If you delete a personal box, you must confirm it at the end of the procedure by entering the basic code. All the messages it contains are erased.
LU D85C UK.book Page 46 Jeudi, 16. décembre 2004 5:30 17 CALL LOG CALL LOG This menu enables you to view the call or event lists of your telephone. The dialled call log presents the calls you made. The received call log presents the calls you received. The event log groups together all the new events that took place in your absence: • reception of an SMS, • calls received during your absence, • Messages from your messaging service.
LU D85C UK.book Page 47 Jeudi, 16. décembre 2004 5:30 17 CALL LOG Calling the last number dialled (Redial) Your telephone has a shortcut key that can be used to automatically redial the last number dialled. From the idle screen, press and hold the green key screen appears. Release green key until the Call log , the last dialled number appears. Press the again. The number is dialled automatically. You can view the other dialled calls by pressing navigator key or on the .
LU D85C UK.book Page 48 Jeudi, 16. décembre 2004 5:30 17 CALL LOG Viewing the events log Viewing the new events If one or more new events occurred during your absence, the information screen "NEW EVENTS View?" appears. • If you do not wish to view the event log at this time, press No • To view the event log, press Yes . . Once the event log has been viewed, the information screen disappears. You can however view it again via the "Calls" menu and the calls missed in the submenu "Incoming calls".
LU D85C UK.book Page 49 Jeudi, 16. décembre 2004 5:30 17 CALL LOG Select Activate or Deactivat using or . Press Confirm . If the "Deactivat" option is confirmed, you can consult new elements. To do this: Select View using or Choose the event using . Press Confirm or . Press Confirm The event appears on the screen. 49 . .
LU D85C UK.book Page 50 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES ACCESSORIES This menu offers you numerous additional functionalities: • Alarm clock: to use your handset as an alarm clock. • Organiser: the handset will ring at the set date and time to remind you of an appointment. • Birthday: the handset will ring at the set date and time. • Timer: to remind you of an event (maximum 99 minutes). • Monitoring : use a handset to monitor a room.
LU D85C UK.book Page 51 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES Alarm clock The alarm function enables you to activate the handset ringer every day at a set time. When the alarm is triggered the selected ring tone sounds for 60 seconds through the handset speaker and an alert screen is displayed. To turn off the alarm press or key. Setting the alarm clock On the navigator key , press or until the Accessories screen is displayed, press OK to confirm. Select Alarm clock using or .
LU D85C UK.book Page 52 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES The alarm settings information screen appears showing the new status. Press Confirm . Modifying the alarm clock time Select Set Time in the list using or . Press Confirm . Enter the time at which you would like the alarm clock to sound. Press Confirm . The information screen displays the new setting. Press Confirm . Once the time has been set, the alarm is automatically activated.
LU D85C UK.book Page 53 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES Press or to increase or decrease the volume. Once the volume is set, press Confirm . The alarm clock settings information screen appears. Press Confirm To exit the menu, press the red key . . Timer The timer function activates the handset ringer at a programmed time. You can view the programmed time on the screen. Once the specified time has elapsed, the handset rings for 60 seconds and the alarm screen is activated.
LU D85C UK.book Page 54 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES Changing the programmed time of the timer In the timer options, select Set Time in the list. Press Confirm Enter the desired time. Press Confirm . . The timer activation screen appears with the modification. Press the OK key to start the timer. Changing the timer ring tone In the timer options, select Ring Tone using keys Confirm or . Press . The list of ring tones appears, the handset plays the ring tone.
LU D85C UK.book Page 55 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES A screen appears indicating whether or not the lapsed time of the timer is visible. Press Edit to change the current status. Press Confirm . The timer is displayed. Press OK to launch it. To exit the menu, press the red key . Birthday or organiser alarms You can programme birthday and organiser alarms (10 of each type) on your DECT telephone. Birthday and appointment reminders will be presented at the set time and day.
LU D85C UK.book Page 56 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES Enter the alarm activation time. Press Confirm . A confirmation screen appears. • To make a correction, press Edit . • To keep the information press Confirm . Viewing a birthday (or organiser) alarm Select Birthday (or Organiser) using or . Press Confirm . The list of programmed birthday alarms (or organiser alarms) is then displayed on the screen.
LU D85C UK.book Page 57 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES - Ring tone: - New entry: to set the ring tone that will sound when the alarm goes off. to set up a new alarm. To exit the menu, press the red key . Monitoring a room You can use your handset to monitor a room. This allows you, for example, to monitor a baby's room. To do so, place one of the handsets in the room to be monitored. This unit will be in "sender" mode. The other handset will remain with you, it is in "receiver" mode.
LU D85C UK.book Page 58 Jeudi, 16. décembre 2004 5:30 17 ACCESSORIES • Keep the receiver handset with you. When in monitor mode, the receiver handset can be used to make calls. To make a call: press Call and dial the number. To answer a call, press the green key . At the end of the call, the handset will automatically return in monitor mode. To stop monitoring: - Press Stop on the transmitter set. The receiver set will automatically return to the standby screen.
LU D85C UK.book Page 59 Jeudi, 16. décembre 2004 5:30 17 GAMES GAMES There are 2 games on your handset - Taquin and Fruit Mind. Taquin This is a solitaire-type game, with three levels of difficulty (9, 16 or 25 elements). The aim is to replace identical objects as seen. The goal is to arrange the objects in the way indicated in the objectives. On the navigator key , press or until the Games screen is dis- played, press OK to confirm Select Taquin using Press or or . Press Confirm .
LU D85C UK.book Page 60 Jeudi, 16. décembre 2004 5:30 17 GAMES Key Action move the piece located under the empty square upward move the piece located above the empty square downward OK C move the piece located to the left of the empty square to the right move the piece located to the right of the empty square to the left To exit the games, press the red key . Fruit Mind Fruit Mind is a thinking game, in which you have to work out the random sequence made up of four fruits.
LU D85C UK.book Page 61 Jeudi, 16. décembre 2004 5:30 17 GAMES The new game screen will appear. Use the keys and indicators below to play.
LU D85C UK.book Page 62 Jeudi, 16.
LU D85C UK.book Page 63 Jeudi, 16. décembre 2004 5:30 17 CUSTOMISING THE HANDSET Adjust the ringer volume using or , press Confirm To exit the menu, press the red key . . Modify the idle screen This menu allows is for changing the your handset idle screen picture. On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm Select Scrn bckgrnd using or . Press Confirm Select from among the images presented using the . or keys.
LU D85C UK.book Page 64 Jeudi, 16. décembre 2004 5:30 17 CUSTOMISING THE HANDSET Modify the colour of the menu backgrounds This menu is for changing the menu background colour. On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm Select Ambiance using or . Press Confirm Select the desired colour using the or . keys, the colours are displayed on the screen as they are reviewed for selection. Press Confirm To exit the menu, press the red key . .
LU D85C UK.book Page 65 Jeudi, 16. décembre 2004 5:30 17 CUSTOMISING THE HANDSET Activate or deactivate the Eco mode On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm Select Eco mode using or . Press Confirm . The status is displayed on the screen. Press Edit to activate or deactivate the power saver mode. The status is changed immediately, Press Confirm To exit the menu, press the red key . .
LU D85C UK.book Page 66 Jeudi, 16. décembre 2004 5:30 17 CUSTOMISING THE HANDSET • To keep the status, press Confirm . The status is modified on the screen (except for keypad where a list of three options appears. Select Beeps, Fun or Off then press Confirm Confirm ) Press . To exit the menu, press the red key . Activating/deactivating the silent mode When in silent mode, the telephone ringer and keypad beeps are inhibited. On the navigator key , press or until the Personaliz.
LU D85C UK.book Page 67 Jeudi, 16. décembre 2004 5:30 17 CUSTOMISING THE HANDSET On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm Select Record using or . Press Confirm The "Record tone" is displayed. Press Record . . Record your text or an audio sequence of up to 8 seconds. Press End to stop the recording before reaching the maximum time. The recording is played, and the message "Do you want to keep the ring tone?" is displayed on the screen.
LU D85C UK.book Page 68 Jeudi, 16. décembre 2004 5:30 17 IRDA IRDA This menu lets you switch your handset to IrDA reception mode, so that you can receive files in V-card format from another D85 handset or any other compatible device. On the navigator key , press or until the IrDA screen is displayed, confirm using OK. An IrDA reception mode activation screen will appear. press Yes . When the IrDA reception mode is activated on your handset, use the emitter device to transfer the data.
LU D85C UK.book Page 69 Jeudi, 16. décembre 2004 5:30 17 SECURITY SECURITY This menu enables you to change or customise the security parameters of your telephone.
LU D85C UK.book Page 70 Jeudi, 16. décembre 2004 5:30 17 SECURITY Programming an emergency number This function allows you to define an emergency number which can be enabled or disabled. Once it is activated, the emergency number will be automatically dialled when the green key • is pressed from the idle screen. Once activated, you can however call a different number with predialling by dialling a number and pressing .
LU D85C UK.book Page 71 Jeudi, 16. décembre 2004 5:30 17 SECURITY • You can pick a number from the phonebook. Press selection using or Press Confirm . and Confirm To exit the menu, press the red key , make your . The number is displayed. . The emergency number is automatically activated. The name of the handset displayed on the idle screen becomes SOS. Modifying the base code The base code (0000 being the default setting) is required to access certain security functions.
LU D85C UK.book Page 72 Jeudi, 16. décembre 2004 5:30 17 SECURITY Defining the call time limit You can set your telephone's operating time. Once the call time limit is used up, it is no longer possible to make calls. To be able to call again, you will have to deactivate the call time limit or set a new limit. If the time limit ends during a telephone conversation, communication will not be cut off. Once you have hung up, it will not be possible to make a new call, emergency number included.
LU D85C UK.book Page 73 Jeudi, 16. décembre 2004 5:30 17 SECURITY Once the modifications have been made, the information screen shows the new call time limit. • To modify the setting, press Edit • To keep the setting, press Confirm . . To exit the menu, press the red key . Defining forbidden prefixes - Call barring You can prohibit the use of certain prefixes on your telephone. When a prefix is forbidden, it will be impossible to call numbers which start with these prefixes.
LU D85C UK.book Page 74 Jeudi, 16. décembre 2004 5:30 17 SECURITY Select the desired option using or . Press Confirm . Creating, modifying or deleting a forbidden prefix Access the selection screen for the Edit prefix option (see above). Select Edit Prefix using or . Press Confirm . A screen showing the forbidden prefixes appears. You can programme up to 5 forbidden prefixes. Select an empty location (dashes) or a prefix to modify using Press Confirm or . . The prefix input screen appears.
LU D85C UK.book Page 75 Jeudi, 16. décembre 2004 5:30 17 SECURITY Select Intrusion using or . Press Confirm A screen displays the current status (on or off). • To change the status, press Edit • To keep the status, press Confirm To exit the menu, press the red key 75 . . . .
LU D85C UK.book Page 76 Jeudi, 16. décembre 2004 5:30 17 SETTINGS SETTINGS This menu enables you to change or customise the handset and base parameters. Accessing the Settings menu On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Using the following flowchart, select the setting you would like to modify or view. Use or to select an option and the Confirm key to enter the menu or access the desired function.
LU D85C UK.book Page 77 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Programming a key This function enables you to programme the and keys on your handset giving you direct access to certain functions right from the idle screen. On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Program keys. using or .
LU D85C UK.book Page 78 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Once the key key is programmed, a screen invites you to programme the . • To keep the function, press Confirm • To modify the function, press Edit Once the . . key is programmed, you return to the Settings menu. To exit the menu, press the red key . You can go from programming the key to programming the key by pressing or on the navigator key.
LU D85C UK.book Page 79 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Enter the time in HH/ MM format and press Confirm To exit the menu, press the red key . . Adjusting the contrast On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Contrast using or . Press Confirm . A list presenting five contrast levels appears. Select the desired level using the screen. Press Confirm or . The contrast is directly visible on .
LU D85C UK.book Page 80 Jeudi, 16. décembre 2004 5:30 17 SETTINGS On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Auto Hang up (or Auto Pick up) using Confirm or . Press . A screen displays the current status (on or off). • To change the status, press Edit • To keep the status, press Confirm screen, press Confirm . . The status is modified on the . To exit the menu, press the red key .
LU D85C UK.book Page 81 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Voice box number This function enables you to receive calls when absent on a voice messaging service of the switched network. To indicate that a new message has been received the reception indicator on the handset is lit in red and the new event message is displayed on the screen. To check your voice messaging service, hold down key . The number of your voice messaging service is set in the factory.
LU D85C UK.book Page 82 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Modifying the country code In order for your telephone to operate correctly, when reading a SIM card or transferring a contact by IrDA, you must enter the country code where the telephone is being used. Contact your provider. On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Country code using or . Press Confirm . An information screen will display the current country code.
LU D85C UK.book Page 83 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Select Language using or . Press Confirm . An information screen presents the current language used. • To keep the setting, press Confirm • To change the setting, press Edit . . Choose the desired language from the language list. Press select the language. Press Confirm or to . The screen shows the new language used. Press Confirm To exit the menu, press the red key . .
LU D85C UK.book Page 84 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Select Adv. Settings using or Select HS Settings using or . Press Confirm . Press Confirm Select Registration. Press Confirm . . . The handset enters the registration mode. On the base: Put the base to which you want to register the handset in registration mode: press on the button on the base for a few seconds. The green light blinks rapidly, the base is in registration mode.
LU D85C UK.book Page 85 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Select PreferredBase using or . Press Confirm . An information screen presents the current base preference for your handset. • To keep the preference, press Confirm • To modify the preference, press Edit . . A list provides the bases among which you can choose the preferred base to which you want your handset to be registered. With the automatic mode you are not required to specify the preference.
LU D85C UK.book Page 86 Jeudi, 16. décembre 2004 5:30 17 SETTINGS A confirmation screen will prompt you to confirm your request: • To re-initialise your handset, press Yes • If you do not wish to re-initialise your handset, press No To exit the menu, press the red key . . .
LU D85C UK.book Page 87 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Enter the base code. Press Confirm . The handset enters the registration mode, "Handset in registration mode" is displayed on the screen. Put the base to which you want to register the handset in registration mode. Once the handset is registered, select the required handset number. Press Confirm . On the base: Put the base to which you want to register the handset in registration mode: press on the button on the base for a few seconds.
LU D85C UK.book Page 88 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Select Handset name using or . Press Confirm . A screen presents the current handset name • To keep the name, press Confirm • To change the name, press Edit the new name. Press Confirm To exit the menu, press the red key . . Use the keypad keys to enter . .
LU D85C UK.book Page 89 Jeudi, 16. décembre 2004 5:30 17 SETTINGS A screen prompts you to confirm the setting of the base to the registration mode. Press Yes to enter the registration mode. The indicator light on your base starts to quickly blink green. You base will remain in registration mode for about 1 minute. You can also use the base buttons to put the base in registration mode: Press on the button on the base for a few seconds.
LU D85C UK.book Page 90 Jeudi, 16. décembre 2004 5:30 17 SETTINGS De-registering a handset This function enables you to de-register a handset from your base. This may be necessary if you have lost a handset or if you already have 6 handsets registered to the same base. On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings using or . Press Confirm . Select Base Settings using or . Press Confirm . Select Delete Handset using or .
LU D85C UK.book Page 91 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Renaming the base On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings using or . Press Confirm . Select Base Settings using or . Press Confirm . Select Base name using or . Press Confirm . Select the base for which you want to modify the name. Press Confirm . Use the C button to make corrections and re-enter the new name using the keypad. Press Confirm .
LU D85C UK.book Page 92 Jeudi, 16. décembre 2004 5:30 17 SETTINGS ADVANCED SETTINGS / LINE SETTINGS Before changing the settings of the telephone line, contact your operator to obtain the parameters for your line. Modifying the network type Your DECT telephone can be installed on a public or private network (when using a PABX) This function enables you to configure your telephone according to the type of network.
LU D85C UK.book Page 93 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Modifying the dialling mode Depending on the type of network your telephone is linked to, it uses tone or pulse dialling. This function enables you to configure your telephone according to the type of dialling used by your network. The default dialling mode is tone. On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings. Press Confirm . Select Line Settings. Press Confirm .
LU D85C UK.book Page 94 Jeudi, 16. décembre 2004 5:30 17 SETTINGS On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings. Press Confirm . Select Line Settings. Press Confirm . Select Flashing using or . Press Confirm . An information screen presents the current flash duration. • To keep the duration, press Confirm • To modify the duration, press Edit . .
LU D85C UK.book Page 95 Jeudi, 16. décembre 2004 5:30 17 SETTINGS Select Line Settings. Press Confirm Select PABX prefix using or . . Press Confirm . An information screen presents the PABX setting in progress. • To keep this setting, press Confirm • To modify this setting, press Edit . . Select the desired option: - Activate or Deactivate: to select a status. - Prefix: to enter the number giving you access to the outside line. - Dig. bef. pref.: to specify the «digits before prefix».
LU D85C UK.book Page 96 Jeudi, 16. décembre 2004 5:30 17 APPENDIX Care and Maintenance Use a slightly damp cloth to wipe the base and handset, do not use a dry cloth as this may cause electrostatic charges. Problems Refer to the table presented below in case of an operational malfunction: Problems Remedies The base indicator light is not lit Make sure that : • the power adapter is properly connected to a power socket. • the power connector is properly plugged into the base.
LU D85C UK.book Page 97 Jeudi, 16.
LU D85C UK.book Page 98 Jeudi, 16. décembre 2004 5:30 17 ENVIRONMENT Preservation of the environment as part of a sustainable development logic is an essential concern of SAGEM SA. The desire of SAGEM SA is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.
Garantie.fm Page 99 Mardi, 21. décembre 2004 2:03 14 WARRANTY Guarantee terms and conditions Dear Customer, You have just purchased a Sagem Dect phone and we thank you for your custom. This equipment was manufactured with the greatest care and we hope that it gives you complete satisfaction. Our helpline is at your disposal to provide you with any technical assistance you may need to operate your Sagem Dect phone at 0207 536 54 00 (national call rate).
4 COUV.fm Page 103 Mardi, 21. décembre 2004 2:02 14 User Guide Data subject to change without notice *251777582A-03* E Société anonyme à directoire et conseil de surveillance au capital de 35.500.000 € - 562 082 909 R.C.S. PARIS 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE http://www.sagem.
