Operation Manual

21
• If you have elected to transfer numerous numbers, take the sender
handset and proceed as follows:
- Select one of the numbers to be transferred in the phonebook
using  or .
- Press Transfer to send the data to the target handset.
Wait for the transfer to be executed. Once it is done, you are taken
back to the list of numbers in the phonebook.
- Select the next number to be transferred using  or  and press
Transfer .
Repeat the procedure until all desired numbers have been
transferred. Press Return
to exit.
Monitoring a room
You can use your handset to monitor a room. This allows you, for example,
to monitor a baby's room.
To do so, place one of the handsets in the room to be monitored. This unit
will be in "sender" mode.
The other handset will remain with you, it is in "receiver" mode.
On the receiver handset:
On the navigator key , press  or  until the Internal call screen is
displayed, press OK to confirm.
Select Room monitor using  or . Press Confirm .
Select the sender handset using  or . Press Call .
The sender handset rings, pick up using the green key .
OK
Candy
03/150
Return
Transfer
Smith
Harris
R
OK
Transm.PhBk
Return Confirm
Room monitor
Internal call
Internal call
OK
---------------------
Return Call
Handset 2
Room monitor
---------------------
INTERCOMMUNICATION
Livre du MD+.book Page 21 Mardi, 9. septembre 2003 5:04 17