Operation Manual
9
The list of handsets registered to the base appears.
Select the handset you want to call using or . Press Call .
The handset called rings, once someone picks up transfer the call by
pressing the red key .
To retake the call before it is picked up by the handset called, press
Return .
Ending a call
At the end of the conversation, press the red key .
Register your new hand set on a base
To register a new hand set on a base it is necessary to:
• put the hand set to registration mode,
• put the base to matching mode.
Then matching (mutual recognition of the base and the new hand set) will
be done automatically (registration may take several seconds).
Get hold of the hand set to register:
On the navigator key , press or until the screen displays
Settings, confirm with OK.
Select Adv. Settings using keys or . Press Confirm .
Select HS Settings using keys or . Press Confirm .
Select Registration. Press Confirm .
The hand set switches to registering mode.
On the base:
Set the base with which you want to link the hand set to matching mode:
• If you have a base incorporating an answering machine, simulta-
neously press the two top pushbuttons of the base for seve-
ral seconds.
OK
------------------
Return
Call
Handset 2
Internal call
Handset 3
R
OK
SMS Settings
Return Confirm
HS Settings
Adv. Settings
Base Settings
OK
Handset name
Return Confirm
Registration
HS Settings
PreferredBase
GETTING STARTED
Livre du MD+.book Page 9 Mardi, 9. septembre 2003 5:04 17