Operation Manual

39
SETTINGS
• If you do not wish to reset the base,
press No .
Enter the base code. Press Valid. . The
RESET IN PROGRESS message is
displayed on the screen.
To exit the menu, press the red key .
De-registering a handset
This function enables you to de-register a
handset from your base. This may be
necessary if you have lost a handset or if you
already have 6 handsets registered to the
same base.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid. .
Select SET BASE. Press Valid. .
Select DELETE HANDSET using  or .
Press Valid. .
Select the handset you wish to unregister in
the list by pressing  or . Press Valid. .
A screen prompts you to confirm the
unregistration. Press Yes to unregister
the handset.
To exit the menu, press the red key .
When resetting the base, the base
code becomes 0000 again.
Renaming the base
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid. .
Select SET BASE. Press Valid. .
Select RENAME BASE using  or . Press
Valid. .
Select the base for which you want to modify
the name
using  or  . Press Valid. .
Enter the new name using the keypad. Press
Valid. .
To exit the menu, press the red key .
LINE SETTINGS
Modifying the network type
Your DECT telephone can be installed on a
public or private network (when using a
PABX).
This function enables you to configure your
telephone according to the type of network.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Before changing the settings of the
telephone line, contact your operator
to obtain the parameters for your
line.
Livre du D60_GB.book Page 39 Mercredi, 8. décembre 2004 10:01 10