Operation Manual

35
SETTINGS
Select AUTO HANG UP (or AUTO PICKUP)
using  or . Press Valid. .
A screen displays the current status (on or
off).
• To change the status, press Edit .
• To keep the status, press Valid. .
To exit the menu, press the red key .
Modifying the Voice box number
This function enables you to receive calls
when absent on a voice messaging service of
the switched network.
To indicate that a new message has been
received the reception indicator on the
handset is lit in red and the new event
message is displayed on the screen.
The number of your voice messaging service
is set in the factory. To change this number,
proceed as follows:
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select VOICE BOX No using  or . Press
Valid. .
The programmed number is displayed on the
screen,
• The number is correct, press Valid. .
• To modify the number, press Edit .
To check your voice messaging
service, hold down key .
Delete the numbers using the navigator C
key. Enter the number. Press Valid. .
To exit the menu, press the red key .
Modifying the language
This function enables you to change the
screen display language.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select LANGUAGE using  or . Press
Valid. .
An information screen presents the current
language used.
• To keep the setting, press Valid. .
• To change the setting, press Edit .
Choose the desired language from the
language list. Press  or  to select the
language. Press Valid. .
The screen shows the new language used.
Press Valid. .
To exit the menu, press the red key .
Livre du D60_GB.book Page 35 Mercredi, 8. décembre 2004 10:01 10