Operation Manual

29
CUSTOMISING THE HANDSET
CUSTOMISING THE
HANDSET
This menu allows you to modify the ring
tones and the visual interface of the handset,
and particularly:
• to assign different ring tones for incoming
calls outsides or intercom (between
handsets),
• to change the idle screen picture,
• to change the menu background colour,
• to activate or deactivate tones being
sounded when pressing the keypad or
when validating the settings information
of your handset.
• activate or deactivate silent mode.
Changing the ring tones
This menu enables you to associate a unique
ring tone to incoming calls or internal calls
(intercom).
On the navigator key , press  or 
until the PERSONALIZ. screen is displayed,
press OK to confirm.
Select RING TONE using  or . Press
Valid. .
Select EXTERNAL CALL or INTERNAL
CALL using  or . Press Valid. .
Select the ring tone of your choice using
the or  keys then press Volume .
Adjust the ringer volume using  or , press
Valid. .
To exit the menu, press the red key .
Activating or deactivating the
beeps
On the navigator key , press  or 
until the PERSONALIZ. screen is displayed,
press OK to confirm.
Select RING TONE using  or . Press
Valid. .
Select BEEPS using  or . Press
Valid. .
Select the beep type using  or  . Press
Valid. .
KEYTONE: the handset beeps when a key is
pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
CHARGER: the handset beeps when you
hang up the handset.
An information screen displays the beep
status for the selected item (Active or
Inactive).
• To change the status, press Edit . The
status is modified on the screen.
Press
Valid.
.
• To keep the status, press Valid. .
To exit the menu, press the red key .
Activating/deactivating the
silent mode
When in silent mode, the telephone ringer
and keypad beeps are inhibited.
Livre du D60_GB.book Page 29 Mercredi, 8. décembre 2004 10:01 10