Operation Manual

28
ACCESSORIES
On the receiver handset:
On the navigator key , press  or 
until the ACCESSORIES screen is
displayed, press OK to confirm.
Select ROOM MONITOR. using  or .
Press Valid. .
Select the sender handset using  or .
Press Call .
The sender handset rings, pick up using the
green key .
On the transmitter handset:
A screen invites you to activate the monitor
mode (sender mode). Press Yes .
Both handsets are now in monitor mode.
• Place the sender handset in the room to
be monitored.
• Keep the receiver handset with you.
The handset in sender mode does
not ring to notify you of incoming
calls. It can therefore be placed in a
room where someone is sleeping.
When in monitor mode, the receiver
handset can be used to make calls.
To make a call: press Call and
dial the number
To answer a call: press green
key .
At the end of the call, the handset
will automatically return in monitor
mode.
To stop monitoring:
- Press Stop on the transmitter set. The
receiver set will automatically return to the
standby screen.
- Press Stop on the receiver set and
confirm by pressing Yes and Stop on
the transmitter handset at the same time.
Livre du D60_GB.book Page 28 Mercredi, 8. décembre 2004 10:01 10