Operation Manual

26
ACCESSORIES
Press Volume to access the volume
setting screen.
Press  or  to increase or decrease the
volume.
Once the volume is set, press Valid. .
An information screen shows the alarm clock
settings, press Valid. .
To exit the menu, press the red key .
Timer
The timer function activates the handset
ringer at a programmed time. You can view
the programmed time on the screen.
Once the specified time has elapsed, the
handset rings for 60 seconds and the alarm
screen is activated. Turn off the alarm by
pressing Stop . The handset stops ringing.
On the navigator key , press  or 
until the ACCESSORIES screen is
displayed, press OK to confirm.
Select TIMER using  or . Press
Valid. .
• To launch the timer without changing the
displayed delay, press Start .
• To change the programmed time, press
Edit .
A list showing the different settings appears.
Incoming calls are displayed directly
without interrupting the timer. For
access to timer adjustment you must
stop it once it is started.
Changing the programmed time of
the timer
Select SET DURATION in the list. Press
Valid. .
Enter the desired time. Press Valid. .
Press Return
to display the timer
activation screen.
The timer activation screen appears with the
modification. Press Start to launch the
timer.
Changing the timer ring tone
To modify the timer ring tone, select RING
TONE using keys  or . Press Valid. .
The list of ring tones appears, the handset
plays the ring tone.
Select the ring tone using keys  or .
Press Volume to access the volume
setting screen.
Press  or  to increase or decrease the
volume. Once the volume is set, press
Valid. .
Press Return , the timer activation screen
appears.
Launch the timer by pressing Start .
Displaying or hiding the
programmed time of the timer
To display (or hide) the time on the screen
during its countdown, select VIEW in the
Timer menu using  or . Press Valid. .
Livre du D60_GB.book Page 26 Mercredi, 8. décembre 2004 10:01 10