Operation Manual

22
SMS SETTINGS
Creating a personal box
On the navigator key , press  or 
until the SMS screen is displayed, press OK
to confirm.
Select SETTINGS using  or . Press
Valid. .
Select PRIVATE BOX using  or . Press
Valid. .
Select NEW using  or . Press Valid. .
Enter the box name. Press Valid. .
Enter the code associated to the box. Press
Valid. .
Enter the code associated to the box again.
Press Valid. .
The telephone provides you with a terminal
number associated to the box. Press
Confirm to keep this terminal number.
Press Edit to change the terminal
number. Select one of the terminal numbers
available in the list. Press Valid. .
The name is added to the personal box list.
If you enter a name that already
exists, a message tells you that the
name already exists. The box name
can have no more than 6 characters.
The user code must contain 4 digits.
Viewing a message from a personal
box
On the navigator key , press  or 
until the SMS screen is displayed, press OK
to confirm.
Select READ SMS. Press Valid. .
Select the personal box. Press Valid.
Enter the personal box code. Press
Valid. .
Select the folder NEW or INBOX using  or
. Press Valid. .
Select the message using  or . Press
Valid. .
The message is displayed on the screen. For
details regarding the operations you can
perform, refer to paragraph Reading a
message, page 17.
Modifying or removing a personal
box
On the navigator key , press  or 
until the SMS screen is displayed, press OK
to confirm.
Select SETTINGS using  or . Press
Valid. .
Select PRIVATE BOX using  or . Press
Valid. .
Livre du D60_GB.book Page 22 Mercredi, 8. décembre 2004 10:01 10