Operation Manual

16
SMS SERVICE
List of special characters:
Sending an SMS
Once you are done writing your text
message, press Select to select the type
of delivery.
You can choose between the following
options:
- SEND: to send a message.
- STORE: to save your text as a draft. It can
be sent at a later time. The draft message is
archived in the "Draft" box.
- CANCEL: to permanently delete the text
message that you just entered.
To transmit message
Select SEND using  or . Press Valid. .
Enter or search for the receiver's number.
• Enter the number using the keypad.
Press Valid. .
or
• If the receiver is listed in the phonebook
as one of your contacts, press (refer
to paragraph Searching for a contact,
page 12). Press Valid. . Your
contact's number appears. Press
Valid. .
A confirmation screen appears. It indicates
the type of transmission and the number to
which your message will be sent.
• If the information is accurate. Press
Confirm . A message appears on the
screen indicating that the transmission of
your SMS is in progress.
• To change the phone number, edit or
modify your text message, press Modify .
Press Edit .
At the end of the transmission, you can save
a copy of your message. It will be stored in
the Sent SMS folder.
• To save the message, press Yes .
• If you do not want to save the message,
press No .
In the event of a delivery failure
An information screen appears indicating
that your service provider was unable to
deliver your message.
Press CONT. .
Different options come up on the screen:
- SAVE: to save your text in draft form. Once
it is saved, you will be able to resolve the
potential problems and send your message
at a later time without having to enter it
again.
- TRY AGAIN: to attempt a new delivery.
- DELETE SMS: to permanently delete your
SMS.
- SEE RECEIVER: to check the phone
number or send the SMS again.
- EDIT: to change the delivery type and
number or your text.
Choose an action using  or . Press
Valid. .
Livre du D60_GB.book Page 16 Mercredi, 8. décembre 2004 10:01 10