Operation Manual
9
Ending a call
At the end of the conversation, press the red key .
Register your new hand set on a base
To register a new hand set on a base it is necessary to:
• put the hand set to registration mode,
• put the base to matching mode.
Then matching (mutual recognition of the base and the new hand set) will
be done automatically (registration may take several seconds).
Get hold of the hand set to register:
On the navigator key , press or until the screen displays
SETTINGS, confirm with OK.
Select ADVANCED SET. using keys or . Press Valid .
Select SET HANDSET using keys or . Press Valid .
Select REGISTRATION. Press Valid .
Press Yes , the hand set switches to registering mode.
On the base:
Set the base with which you want to link the hand set to matching mode:
• If you have a base incorporating an answering machine, simulta-
neously press the two top pushbuttons of the base for seve-
ral seconds.
• If you have a base that does not incorporate an answering machine,
press the push button on the base for several seconds.
The green light of the base quickly flashes. The base is in matching mode.
The second hand set and the base both try to hook up. Matching may take
several seconds.
Once the hand set is registered, the hand set automatically exits from the
matching mode and indicates end of registration.
You can also put your base in matching mode using a hand set
already registered by selecting the matching function in the SET-
TINGS/ADVANCED SET./SET BASE menu.
Return
Valid
SET HANDSET
Return
Valid
REGISTRATION
No
Yes
REGISTER HS?
G
ETTING
STARTED
Livre D50H EN.book Page 9 Vendredi, 12. septembre 2003 4:34 16