User guide

48
SETTINGS
LINE SETTINGS
Modifying the network type
Your DECT telephone can be installed on a
public or private network (when using a
PABX).
This function enables you to configure your
telephone according to the type of network.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. using  or .
Press Valid. .
Select SET LINE using  or . Press
Valid. .
Select NETWORK TYPE using  or .
Press Valid. .
A screen presents the current status (public
or private).
• To keep the status, press Valid. .
• To change the status, press
Edit
.
The status is modified on the screen, press
Valid. .
To exit the menu, press the red key .
Before changing the settings of the
telephone line, contact your operator
to obtain the parameters for your
line.
Modifying the flash duration
(R key)
If you connect your telephone to a private
automatic branch exchange or use it in a
foreign country, you may need to modify the
flash duration in order to use your telephone
correctly with regard to the following
functionalities: outgoing 2nd call, incoming
2nd call, 3 way calling.
Contact your service provider to obtain the
correct flash duration and then modify it by
doing the following.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid. .
Select SET LINE. Press Valid. .
Select FLASHING using  or . Press
Valid. .
An information screen presents the current
flash duration.
• To keep the duration, press Confirm .
• To modify the duration, press Edit .
Select the new duration using  or . Press
Valid. .
The screen presents the new flash duration.
• To keep the duration, press Confirm .
• To modify the duration, press Edit .
To exit the menu, press the red key .
LU 252973993 D30 T V H Australie.book Page 48 Mercredi, 20. juin 2007 9:47 09