User guide

45
SETTINGS
A confirmation screen will prompt you to
confirm your request:
• To re-initialise your handset, press
Yes .
• If you do not wish to re-initialise your
handset, press No .
To exit the menu, press the red key .
Personal registering
To register a handset in the following cases:
• the base’s code is no longer 0000 (you
have customised the code),
• you own several bases,
• you want to choose a name for your base
(name displayed on the welcome
screen),
• you want to choose the handset
registration number.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid. .
Select SET HANDSET. Press Valid. .
Select PERSON. REGISTR using  or ,
Press Valid. .
Select the required base number. Press
Valid. .
Delete the current base name using C key (if
necessary).
Enter the new name, press Valid. .
Enter the base code. Press Valid. .
The handset enters the registration mode,
"HANDSET IN REGISTR. MODE" is
displayed on the screen.
Put the base to which you want to register the
handset in registration mode.
Once the handset is registered, select the
required handset number. Press Valid. .
On the base:
Put the base to which you want to register the
handset in registration mode:
• For the D30T, press on the button
on the base for a few seconds.
• For the D30V, press on the button
on the base for a few seconds.
The green light blinks rapidly, the base is in
registration mode.
The new handset and the base are mutually
searching for each other. The registration
may take several seconds.
Once the handset is registered, the handset
automatically exits the registration mode and
lets you know the registration is done.
You can also set your base to the
registration mode using a handset
already registered by selecting the
Registration function in the menu
SETTINGS/ADVANCED SET/SET
BASE.
LU 252973993 D30 T V H Australie.book Page 45 Mercredi, 20. juin 2007 9:47 09