User guide

42
SETTINGS
Once the modifications have been made, the
information screen shows the new call time
limit.
To exit the menu, press the red key .
Defining forbidden prefixes - Call
barring
You can prohibit the use of certain prefixes
on your telephone. When a prefix is
forbidden, it becomes impossible to call
numbers that begin by this prefix.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select SECURITY using  or . Press
Valid. .
Select RESTRICTION using  or . Press
Valid. .
Enter the base code. Press Valid. .
The prefix screen appears. Select an empty
location (dashes) or a prefix to modify using
 or . Press Valid. .
Enter the prefix using the keypad. Press
Valid. .
Depending on the programmed
prefixes, certain numbers will no
longer be accessible. For example, if
you programmed 06 as a forbidden
prefix, it will not be possible to call a
number that begins by 06.
When all prefixes are programmed, press
Return .
A restriction activation screen appears, press
Yes to activate restriction.
To exit the menu, press the red key .
Modifying the base code
The base code (0000 being the default
setting) is required to access certain security
functions. It must be composed of 4 digits.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select SECURITY using  or . Press
Valid. .
Select CHANGE CODE using  or . Press
Valid. .
Enter the old base code using the keypad
(default is 0000). Press Valid. .
Enter the new base code using the keypad.
Press Valid. .
Confirm by entering the new base code
again. Press Valid. .
To eliminate a prefix, select it using
keys  or  and press Valid. .
You can programme up to
5 forbidden prefixes.
LU 252973993 D30 T V H Australie.book Page 42 Mercredi, 20. juin 2007 9:47 09